Replica Patek Philippe CUBITUS 5821-1AR-001 PP+ Factory Blue Dial

Description

PP+ Factory Patek Philippe 5821-1AR-001 Replica Watch Review

Among all the new releases by Patek Philippe recently, there has been lots of discussions around this watch. Square case and blue dial horizontally striped, with a mix of rose gold and stainless steel, it has a sporty yet still has the Patek Philippe simple and orderly style. This article will thoroughly and systematically examine this PP+ factory replica watch from several different angles: proportions; material and skill; dial details; movement; and the wear feeling.

Is Cubitus similar with the original in proportion?

The most interesting part of this watch is that it has a square case. Unlike traditional rounds watches,CUBITUS’s case is more visual of geometric structer and line. PP+ factory controlled the proportions of the case well, not intentionally exaggerating sharp angles, but using soft bevels to soften the square forms. Watch case diameter is 45mm, thickness is about 8.3mm, the same as the original, which is quite thin for a square watch. On the wrist, it’s not a brick, the thickness is also controllable. Lugs and straps are all one, the dial takes up most of the attention, not the edges of the case. Dial is the core: The blue dial with horizontal stripes is clean and uncluttered, unadorned, but very well-proportioned. The stripes have even spacing and the reflection is soft and changes in colour depth at different angles, not just one bright blue. The baton-shaped hour hands have a strong three-dimensional feel, with clean edges, perfectly complementing the square case style. The hands are simple and the length is appropriate and does not affect the markers. ​3 o’clock placement for the date window with a nice window that is practical but still keeps balance for the dial. Patek cares quite a bit about whether the dial looks good overall.

How are the line in cases and craftsmanship?

The CUBITUS series needs very good craftsmanship in its case design because the big flat parts can let people see how good the work was done. PP+ factory used various polishing and brushing process on the watch replica, it’s distinguishable. The front of the case and bezel are finely polished with even refractions and the sides and some areas are brushed with a consistent texture, it gives a neat finish. Chamfered edges are naturally smooth and not sharp. This gives the watch a smooth and understated look. Note that this watch is actually a two-tone replica watch that does not use real 18K pink gold, instead it uses 316L SS material as a base and simply imitates the appearance of actual rose gold via a gold plating process. Currently, there are two major ones: water plating and electroplating. Electroplating has better color stability, durability, less likely to fade, and no overly bright or artificial color. This rose part of the watch is electroplating instead of simply paint. So it gets a richer color. It also holds the plating better to the steel and no large peeling pieces. In daily life, whether it’s skin contact or rubbing against the cuff of clothes, all of this is no problem at all, so rose gold is fairly complete and stable as a solution to replica watches.

Is the PP+Factory Patek Philippe movement good?

As for the movement: this replica watch adopts the self-winding mechanical Cal.26-330 S C superclone movement with a frequency of 28,800 vibrations per hour, 30 jewels, and a power reserve of around 35 hours. It uses a Gyromax Balance Wheel and a Spiromax Hairspring. In actual use, the timekeeping is very good, and the deviation is within a reasonable range: Power reserve isn’t too long but it’s good enough for commuting to and fro daily and normal wear. We can see the operation of the movement through its transparent back, which has a very clear structure and appeals to people who like a mechanical feel. This watch can withstand 30 meters of water pressure, mostly for daily use, such as washing hands or light rain, but not suitable for swimming or wading. This positions itself right at the crossover point of being both formal and sporty.

How is it to wear?

This PP+ Factory Patek Philippe 5821-1AR – 001 replica watch uses a unibody metalled bracelet, which is part of the overall design. The bracelet is also made of stainless steel and rose gold which is pretty consistent with the case. The links flow smoothly and naturally and follow the curve of the wrist with no warping or discomfort noticeable. Folding clasp is specially hidden, the strong sense of unity is added. This unibody metal body is also one of the sources of the watch’s luxury.Feelwise, it’s quite restrained, reasonable and there’s a touch of design flair. Square case brings it some presence on the wrist but it has an alright balance with the thickness of it not looking too obtrusive. A blue dial with a two tone construction, this watch will not look old or too sporty. This watch is suitable for people with large wrists, and it’s also a perfect watch for those semi formal wear, business professional, or just more towards the older side. Overall, the Patek Philip replica in the PP+ factory does a great job with proportion, with the perfect square case, smooth dial texture and stable two tone finish. It’s by far the best watch he factory offers. It’s not a watch that will impress you at first sight, it’s more pleasing to the eye, with emphasis on proportion and design logic. If You like the design style of the CUBITUS series and if you want a replica which has a different style, comfortable to wear and also with better overall quality, then this watch will be a definite choice.