Replica Breitling TOP TIME AB01768A1A1A1 BLS Factory V2

Description

BLS Factory V2 Breitling AB01768A1A1A1 Replica Watch Review

Breitling Top Time BLS Factory V2 version of the watch with a green bezel and orange hand, very attractive. However, if you value practicality and understated style, it may not be suitable. This watch is mainly for daily wear, retro style, bright colors. Its size is 41mm in diameter, 13.3mm thick, it is a B01 automatic mechanical movement, has a 72-hour power reserve, is 100m water resistant, has a sapphire crystal, and a stainless steel case and bracelet. In short, if you want to have a distinctive but unassuming chronograph, V2 is a good choice; If you prefer a completely functional and understated watch, or if you have very high demands on the dial details, then it may not be suitable for you.

Does this BLS factory V2 Top Time look similar at first glance?

Upon the first try on the BLS Factory V2 Breitling AB01768A1A1A1 Replica Watch, I did not get a rough and manly pilot’s watch but a retro racing feeling. Mint green bezel Orange chronograph seconds hand; Double Subdials of Panda style are clever and work quite easily. Upon closer inspection, I pay attention to the printing quality of the dial, and light-colored dials with colored markers are more likely to show up small defects such as rough edges and ink bleeding. Based on my wearing experience, as long as the case proportions and hand lengths are moderate, it can be worn normally in most daily social occasions. But if you hand the watch to another person to inspect, it will be less tolerable of detail flaws than it is with the black dial sports watch. Specifically as mint green bezels look really cold and harsh against the bright orange chronograph second hand, and you can see a memorable phone right away. Panda Style Double Sub-dials retain some classic features of vintage racing watches and add something. For the dial print I looked at closely and it’s a great print job. The numerals and markers are all clear, no rough edges, no ink bleeding, on the light-colored dial, it is relatively rare. As for how much of each case proportion and how long the hands are, BLS factory has clearly been put in a lot of work, it is comfortable and proper length on the wrist, which can deal with all kinds of daily wear as well as social situations.

What are the upgrades in the BLS factory V2 version?

From some versions of the same series, based on my personal experience, V2 has two rather big changes, one is on dial, more accurate bezel colors, sharper fonts, more defined sub-dials boundaries; second one is the feel of case and pushers, it’s more crisp to push, and more stable bounce. For the kind of people that wear watch depending on the feeling and concerned about the aesthetic consistent, then I would recommend on upgrading your dial, because if the color of your dial is wrong, no matter how you put on the watch will always look terrible. But if you are a person who often watches chronographs and like to use pushers, then whether the V2 has solved the problems of zeroing misalignment and the mushy feeling of the pushers is very important. My advice is that the reason we should pick V2 is for more detailed and less likely to need repairs, not that the seller says V2 is better.

Will a thickness of 41mm or 13.3mm appear bulky?

The size is 41mm diameter 13.3mm thickness. The thickness is acceptable for an automatic chronograph, but the visual style of Top Time is light and retro, if the side lines are not clear enough, it will appear a bit thick. I tried wearing it myself and found out it was not just how big the number but also how my lugs attach themselves to and the polished sides to the case. If done well, it will not appear too thin, but if not done properly, it may look bulky because of the rounded edges. A quick self-check is to look at it from the side, looking at 3 o’clock, and check whether the crystal and bezel are well formed, and whether the light reflected from the sides of the case is smooth. Then, watch out for your watch to be a bit tight and bend your wrist. If the lugs are too tight or the mesh strap is not tight, it will be uncomfortable in reality when wearing. With a mint green bezel and a light-colored dial, the main problems are uneven or off-color marks on the dial, as well as insufficient sharpness of the marks and fonts, resulting in blurriness. When I observe the dial, I check in sequence: if the numerals and markers on the outer ring are evenly aligned, if the minute markers are precisely centered at 12 o’clock, and if the markings on the sub-dial are neatly processed. Use your phone to zoom in at 2x and take a look at the 12 o’clock position. If there is a visual deviation of the zero points of the outer and inner rings, it is a typical indication. Then scan the entire ring to see if there are any areas with uneven shades of the mint green, it will look very uneven under a bright light.

How does the BLS factory in-house movement?

This replica watch uses the B01 super clone movement, has a 72-hour power reserve, and has a daily error of -3 to +5 seconds. But I always think that the replicas should not be judged only by the specifications, and the replica watches’ feeling, zeroing consistency and long term stable are also important. For checking a kind of such, I’d carry out the really trial. I start, stop and zero the watch five times in a row, and I observe whether the chronograph second hand returns to the 12 o’clock position smoothly each time without any jitter. Also to see if the winding process was sandy, if the crown stop is clear. In my actual tests, this movement always returned the chronograph second hand to 12 o’clock in the five operations I performed without jittering, and the zeroing consistency was quite good. There was no sanding during winding, the crown stop was clear, and the operation was very smooth. Even after long-term wear, the timekeeping is relatively stable, with the time deviation within the reasonable range and no large deviation, exhibiting relatively good long-term stability.

Who is not allowed to buy the BLS V2 Top Time replica watch?

If it is intended for easy commuting, I do not recommend purchasing this watch, especially if it is often bumped, exposed to water and sweat, and no maintenance is required. The assembly and movement of a chronograph replica watch have higher requirements. If you don’t like it when people get up close and personal with your watch, then this one is probably going to encourage them to take a close look at the colors and patterns on the face; it’s more forgiving of mistakes than a black dial sports watch. If you use a chronograph frequently and press the pushers dozens of times a day but don’t have a good after-sales service channel, I suggest that you might as well consider a simpler three-hand model or a more durable alternative. Selling points of BLS factory V2 watches are retro style dial and mesh strap. The color matching is single for visibility in light. Mesh strap Design with wrist suitable, also mesh is very good materials, exquisite and long winded. It’s whether you are able to accept it. If you can accept the fact that chronograph replica need more frequent care and can accept the deviation in their quality control, you may be able to buy one. But if you want a trouble-free and enduring watch, then chronograph watch replicas are recommended to be avoided.